Why Is Arris Router Blinking Green? How To Resolve It?
Generally, every Arris networking device comes with different LEDs on it. Similarly, each light has its own meaning that depicts the normal and abnormal functioning of it. Further, Arris router blinking green light on WiFi, Power, etc. indicators also revealed various meanings. Therefore, to understand the behavior of these lights, you have to read this brief guide!
Understand the Green light status on the Arris router
Additionally, before you understand the normal/abnormal nature of the flashing green LED on your Arris router, must take a look at the meaning first to understand your gateway status:
Model: SBG 8300 (an example)
Front Panel Green LED
Online LED
- Slow Blinking: Getting IP address
- Fast Flashing: Receiving IP
- Solid Green: IP Link/Online
- Alternating Blue & Green: Firmware Download
WiFi Light
- Slow Blinking: No Clients found (dual-band/5Ghz)
- Solid Green: Get a Client but No Traffic (5Ghz or dual band)
- Fast Blinking: Clients with Active traffic/WPS (5Ghz or dual band)
Back Panel LEDs (Green)
- Blinking: Data traffic is in progress
- Solid: Shows a data transfer rate of one gigabit per second
When is Arris router blinking green turns out to be an issue?
Moreover, you now understand the behavior of the green LED on the Arris router but remember that it may differ in other models. Further, sometimes this light stays for a longer time than normal. This may be due to various reasons, like network outage, power loss, cable issues, etc. So, to resolve the Arris wifi router blinking green issue, must follow the below-mentioned troubleshooting tips:
- Ensure the sufficient power supply to the Arris router.
- Also, check that the connected power source provides the required voltage to the networking device.
- Do not use burnt/cracked power sources and check that there is no damaged power cord or adaptor.
- Make sure you activate your network connection by contacting your local ISP.
- Eliminate the signal obstructions and place the networking device in a ventilated area where signal strength is strong.
- Check the values of the upstream and downstream channels as these are not below the recommended.
- Confirm that you linked the Arris router and modem properly if you use separate ones.
- Stabilize the network connection by connecting an ethernet cable to your router and client device.
- To fix the technical glitches, power cycle your router by unplugging it for 30 seconds.
- Manage the load on the modem while downloading the large-sized files.
- If nothing else works, then hard reset the Arris router.
Wrapping up
All things considered, the information we share on this page will surely assist you to understand and resolve the Arris router blinking green issue. Here, you understand the behavior of the green light and troubleshooting tips when it should be an issue. To learn more, keep reading our updated blogs!